ALMCO
ALMCO Cabinet Spray Washers
Rotary spray washing that hits every side of the part, from economy cabinets to stainless production cells
- Turntable Sizes
- 24 to 72 in
- Construction
- Stainless steel
ALMCO builds vibratory finishing and industrial parts washing equipment that takes the burrs off and the dirt out. Carlson sells and services the ALMCO line across New England, from small-part finishing to production wash lines.
Highlighted Equipment
ALMCO
ALMCO Immersion Washers
Tank agitation washing for parts that a spray cannot reach, from economy units to automated production
- Load Capacity
- Up to 340 lbs
- Operation
- Solvent or aqueous
ALMCO
ALMCO Vibratory Finishing Tubs
Straight-tub vibratory finishing that deburrs and polishes everything from wing spars to small stampings
- Models
- VB-1615 to VB-2048
- Working Capacity
- 2.3 to 11.3 cu ft
ALMCO
ALMCO Vibratory Round Bowls
Round bowl vibratory finishing with built-in separation for batch or through-feed work
- Models
- SBB-8, SBB-12, SBB-24
- Working Capacity
- 8 to 24 cu ft
The Range
Browse ALMCO by Category
5 Machines
Parts Washing
Cabinet, conveyor, immersion, and rotary drum washing for clean, dry parts.
View Machines6 Machines
Surface Finishing
Vibratory, centrifugal barrel, disc, and spindle finishing for every part size.
View Machines1 Machine
Supporting Equipment
Conveyors, separators, filtration, and custom systems that tie the line together.
View MachinesParts Washing
ALMCO
ALMCO Cabinet Spray Washers
Rotary spray washing that hits every side of the part, from economy cabinets to stainless production cells
- Turntable Sizes
- 24 to 72 in
- Construction
- Stainless steel
ALMCO
ALMCO Immersion Washers
Tank agitation washing for parts that a spray cannot reach, from economy units to automated production
- Load Capacity
- Up to 340 lbs
- Operation
- Solvent or aqueous
ALMCO
ALMCO Inline Conveyor Washer
Continuous flow-through washing that cleans, rinses, and dries high-volume parts without stopping
- Belt Widths
- 6 to 36 in
- Process Stages
- Wash, rinse, blow-off dry
ALMCO
ALMCO Rotary Drum Washer
Mass-production drum washing that tumbles fasteners, stampings, and small parts clean in continuous flow
- Inner Drum Diameters
- 18, 24, 30, 36 in
- Drum Drive
- Variable speed
ALMCO
ALMCO U-Shape Conveyor Washer
Wash, rinse, and dry on a single footprint where parts feed and discharge on the same side
- Belt Widths
- 12 to 36 in
- Process Stages
- Wash, rinse, blow-off dry
Surface Finishing
ALMCO
ALMCO Centrifugal Disc Finishing
Disc finishing that deburrs and polishes up to ten times faster than vibratory
- Models
- RF-20 to RF-400A
- Total Capacity
- 0.7 to 12.1 cu ft
ALMCO
ALMCO HZ Series Centrifugal Barrel Finishing
High-energy centrifugal barrel finishing that polishes and deburrs precision parts fast
- Models
- HZ-12 to HZ-330
- Motor
- 1 to 30 HP
ALMCO
ALMCO Spindle Finishing
High-speed spindle deburring that holds a consistent finish on precision parts
- Models
- S2-30 to 4SF-72
- Spindles
- 1 to 4
ALMCO
ALMCO Sutton Large Part Finishing
Heavy-duty spindle finishing for turbine disks, blades, blisks, and impellers
- Models
- CFT-2000 to CFT-6000
- Spindle Speed
- 30 to 1200 RPM
ALMCO
ALMCO Vibratory Finishing Tubs
Straight-tub vibratory finishing that deburrs and polishes everything from wing spars to small stampings
- Models
- VB-1615 to VB-2048
- Working Capacity
- 2.3 to 11.3 cu ft
ALMCO
ALMCO Vibratory Round Bowls
Round bowl vibratory finishing with built-in separation for batch or through-feed work
- Models
- SBB-8, SBB-12, SBB-24
- Working Capacity
- 8 to 24 cu ft
Supporting Equipment
ALMCO
ALMCO Supporting Equipment
Conveyors, separators, filtration, and custom systems that tie a finishing or washing line together
About ALMCO
The Science of Finishing
ALMCO has manufactured industrial finishing and parts washing equipment in Albert Lea, Minnesota since 1946, and every machine is built and shipped from the USA. ALMCO is 100 percent employee owned, part of Innovance, a family of employee-owned manufacturers, which means the people building your machine have a direct stake in getting it right.
ALMCO's applications specialists test your actual parts and production goals at their Process Lab for free before recommending equipment. Carlson carries ALMCO's full vibratory finishing, centrifugal finishing, and parts washing lineup for New England fabricators who need a deburring or cleaning solution built around the part, not a generic machine.
Get a Quote
Put an ALMCO on your floor
Tell us what you need and we will match you to the right ALMCO machine with pricing and lead time.
Thanks. Your quote request is in.
A Carlson specialist will follow up shortly. Need to talk now? Call us at 781-937-9599.
That did not go through.
Something blocked the submission. Try again, or reach us directly at781-937-9599.