Durma
Durma DL-C 160 Angle Cutter
Automated L-angle processing center that marks, punches, and shears steel angle in a single CNC-controlled line
- Model
- DLC 160
- Max L Profile Size
- 160 x 160 x 19 mm
By Application
CNC Plasma and Shears
When the material gets thick or the job is straight-line blanking, plasma and shears do the work. Plasma cuts heavy plate fast and economically, and guillotine shears square up sheet and plate in volume. This is the equipment that turns plate into parts ready for the next operation.
The Lineup
CNC Plasma and Shears Machines
Durma
Durma MS Guillotine Shear
Direct-drive mechanical guillotine shear for fast, high-volume straight-line cutting of light-gauge sheet
- Models
- MS 1303 to MS 3004 (6 models)
- Cutting Length
- 1350 to 3100 mm
Durma
Durma PL-C Plasma Cutting System
CNC plasma cutting table with Hypertherm cutting head and AURORA software for reliable thick-plate cutting of mild steel, stainless, and aluminum
- Available Models
- PL-C 1530 to PL-C 40140
- Table Size Range
- 1.5 x 3.0 m (PL-C 1530) up to 4.0 x 14.0 m (PL-C 40140)
Durma
Durma SBT Guillotine Shear
Swing beam guillotine shear for precise straight-line cutting with minimal sheet distortion
- Models
- SBT 3006 to SBT 4013 (7 models)
- Cutting Length
- 3100 to 4100 mm
Durma
Durma VS Guillotine Shear
CNC hydraulic guillotine shear with variable rake angle for clean straight-line blanking across a full range of plate thicknesses
- Models
- VS 3006 to VS 10013 (16 models)
- Cutting Length
- 3080 to 10100 mm
Boschert
Boschert Gizelis ElectroCut Electric Shear Series
Globally patented servo-electric swing beam shear with variable rake angle, up to 40 cuts per minute and half the energy of a hydraulic shear
- Models
- G ElectroCut 2004, 2504, 3006, 4006
- Max Cutting Thickness (mild steel)
- 4 / 4 / 6 / 6 mm
Boschert
Boschert Gizelis G-Cut CNC Series Hydraulic Shears
Swing beam CNC shears in fourteen configurations for mild and stainless steel, with return-to-front cutting and automatic thickness sensing
- Configurations
- 14 configurations (G-Cut CNC 2504 through 6013)
- Cutting Length
- 2600 mm to 6100 mm
Piranha
Piranha Arc Max Elite CNC Plasma Table
Production plasma table with FlashCut CNC, Hypertherm Powermax SYNC, Smart 360 bolt-ready holes, laser plate alignment, and auto nesting standard
- Available Sizes
- 5x5 / 4x8 / 5x10 / 6x12
- Max Material (mild steel)
- Up to 2 in plate
Piranha
Piranha Arc Max Ultra CNC Plasma Table
Entry-level production plasma table with welded steel frame, HIWIN rails, and Hypertherm Powermax SYNC, plus the longest controller and motor warranty in the Arc Max family
- Available Sizes
- 5x5 / 4x8 / 5x10 / 6x12
- Max Material (mild steel)
- Up to 2 in plate
Piranha
Piranha Arc Max Unlimited CNC Plasma Table
Heavy plate plasma table cutting up to 3-inch mild steel, compatible with Hypertherm MAXPRO200, Powermax, and oxy-fuel in one machine
- Available Sizes
- 4x8 / 5x10 / 6x12
- Max Material (mild steel)
- Up to 3 in plate
Piranha
Piranha Arc Max X CNC Plasma Table
HD X-Definition plasma cutting with Hypertherm XPR power source, the tightest hole and edge tolerance in the Arc Max lineup at 1800 IPM
- Frame Construction
- Reinforced welded steel frame engineered for thicker plate
- Gantry
- Aircraft-grade aluminum gantry
Piranha
Piranha C Series CNC Plasma Table
Production-ready CNC plasma table with all-welded steel frame, Panasonic servo drives, and genuine Hypertherm power, assembled complete at the factory
- Model
- C510
- Cutting Area
- 5 ft x 10 ft
Buyer Guidance
How to Choose
When the material gets thick, the math changes. Durma builds its PL-C plasma around Hypertherm cutting heads and positions it as reliable for higher levels of material thickness, where running a laser would cost more than the job needs. Plasma cuts heavy plate fast and economically, so it is the workhorse for structural and heavy-gauge work.
For straight-line, high-volume blanking of sheet and plate, a guillotine shear is hard to beat. Durma has manufactured shears since 1956, and the VS shear offers variable rake adjustment from 0°30' to 2°, so you can dial in the cut and hold down twist and bow on the blank. When you are squaring up sheet and plate in volume, the shear is the foundation.
Not Sure Which Machine Is Right for Your Shop?
Carlson's team has placed equipment in New England fabrication shops for over 67 years. We know which machine fits your material, your volume, and your floor plan. Call us or send a note and we will get back to you the same day.