Boschert brings Swiss-made PBT profile benders and French-built Picot plate roll bending machines to North America, alongside its punching, notching, and forming lines. Carlson represents Boschert across New England with local sales and full service support.
Boschert
Combined CNC punching and fiber laser cutting on one machine, so complex parts are punched, formed, and cut in a single setup
Boschert
Globally patented servo-electric swing beam shear with variable rake angle, up to 40 cuts per minute and half the energy of a hydraulic shear
Boschert
Horizontal ram bending machines engineered for shipbuilding profiles, HP ship frames, Holland profiles, bulb flat, L and T profiles
The Range
6 Machines
Swiss-made 3-roller profile benders (PBT) for bending steel and aluminum profiles, from small radii on the compact Arkus12 up to large structural sections on the servo-driven Helix.
View Machines5 Machines
French-built Picot plate roll bending machines for cylinders and cones, from thin sheet on the RCE to 50 mm plate on the 4-roll R4C, with EasyRoll CNC assistance.
View Machines6 Machines
Stierli-Bieger horizontal ram bending and straightening machines, from manual and CNC control tiers to heavy benders built for rail, shipbuilding, and copper bar work.
View Machines9 Machines
CNC and manual punching, combination punch-laser machines, and hydraulic notchers for sheet metal fabrication.
View Machines2 Machines
CU Profi and CU Master copper bar processing machines for bus bars and electrical components, from simple parts through fully automated systems.
View Machines6 Machines
Boschert Gizelis CNC press brakes, from the fast 40-ton G-TurboBend through heavy-duty G-HD models past 880 tons, plus the servo-electric energy-saving ElectroBend and RoboBend automation.
View Machines2 Machines
Boschert Gizelis swing beam guillotine shears, hydraulic G-Cut and servo-electric ElectroCut, for mild and stainless steel with return-to-front cutting and automatic thickness sensing.
View MachinesProfile Bending
Boschert
Compact Swiss-made profile bender for small steel and aluminum profiles with extremely small radii down to R35mm
Boschert
Compact three-roller profile bender that drives all three rollers individually and holds X-axis position to 0.0004 inch for repeatable curves in steel, stainless, and aluminum
Boschert
65-ton Swiss servo profile bender for extra-large structural profiles in architecture, steel, and aluminum construction
Boschert
New compact Swiss profile bender positioned between Arkus12 and PBT25 with D40 or D65mm shaft options
Boschert
Swiss-made workhorse profile bender with 27-ton force and modular tooling for profiles up to 300mm height
Boschert
35-ton servo-driven Swiss profile bender with 70% energy savings and 400mm roller height for demanding structural work
Plate Roll Bending
Boschert
AI-based plate roll bending software that integrates 150 years of rolling expertise into an intelligent, predictive digital assistant
Boschert
Symmetrical 4-roll hydraulic plate bending for thick sheet and production runs, nearly 40 configurations with EasyRoll CNC
Boschert
Asymmetrical 3-roll plate bending machine with cast iron frame and geared-motor drive for high productivity up to 2 meters wide
Boschert
Symmetrical 3-roll hydraulic plate bender that prebends both edges for thin sheet from 0.2 to 4 mm with EasyRoll CNC assistance
Boschert
Symmetrical 3-roll hydraulic plate bending with EasyRoll CNC in over 50 configurations from 1100mm to 6100mm bending length
Horizontal Bending / Straightening
Boschert
Extremely accurate CNC copper bar bending with automatic spring-back compensation for bus bars and electrical components
Boschert
Graphical CNC horizontal ram bending with network and CAD/CAM programming capability
Boschert
Entry-level horizontal ram bending and straightening with basic manual controls for versatile production work
Boschert
Radial bending around a variable-diameter pin with rotating drive, up to 200 programs with 10 steps each
Boschert
Horizontal ram bending machines engineered for shipbuilding profiles, HP ship frames, Holland profiles, bulb flat, L and T profiles
Boschert
Horizontal ram bending with simple CNC controls for repeatable precision bends across copper bar and structural profiles
Punching / Cutting
Boschert
Combined CNC punching and fiber laser cutting on one machine, so complex parts are punched, formed, and cut in a single setup
Boschert
CNC punching with the CP EVO series and RevoTool multi-tool for virtually any contour with automatic tool change
Boschert
CP series punching with a 360-degree rotating, auto-indexing ram, so every tool including the RevoTool sets to any angle for complex contours without stopping
Boschert
High-performance manual punching machines for smaller production runs with precision and efficiency
Boschert
Compact flatbed fiber laser in 3015 and 4020 sizes with 1, 2, or 4 kW of power for fast, clean cutting of thin and medium sheet
Boschert
Hydraulic notchers with TRI-GIDE 3-point ram guidance for 90-degree fixed or 30 to 120-degree variable angle cuts
Boschert
The mid-format MultiPunch models, 1250 and 1500, bring 8-station auto tool change and 360-degree rotation to sheets up to 60 by 120 inches
Boschert
CNC punching, forming, and marking on super-format 2000 x 4000 mm sheets, with a 12-station tool changer and up to 96 tools for high-mix work
Boschert
Two or three independent punch heads working the same sheet, the highest-throughput option in the Boschert CNC punching lineup
Copper Bar Processing
Boschert
World benchmark copper bar processing for complex parts with maximum tool count and automation options
Boschert
Versatile copper bar processing with many options from simple bus bars through fully automated systems
Press Brakes
Boschert
Servo-electric press brake series with 60, 80, and 100-ton models, cutting energy use in half with no hydraulic fluid to source or service
Boschert
Top-class CNC press brakes from 80 to 320 tons and up to 6.1 meters, built for flexible bending with premium equipment and components
Boschert
Value-focused CNC press brakes from 80 to 210 tons, with a 15-inch touchscreen, 2-axis back gauge, and CNC crowning as standard
Boschert
Heavy-duty CNC press brakes from 440 to 880 tons with a rigid frame and bronze-slider beam for the most demanding forming
Boschert
Fast, quiet hydraulic press brake built for high-volume repeat production with independent Y1/Y2 cylinder control
Boschert
Robotic bending cell option that mounts to any Boschert Gizelis hydraulic press brake for unattended, high-speed production
Guillotine Shears
Boschert
Globally patented servo-electric swing beam shear with variable rake angle, up to 40 cuts per minute and half the energy of a hydraulic shear
Boschert
Swing beam CNC shears in fourteen configurations for mild and stainless steel, with return-to-front cutting and automatic thickness sensing
About Boschert
Boschert was founded in Lörrach, Germany in 1946 by Ludwig Boschert, and the company has stayed under the same family's leadership ever since. In 2004, Boschert formed a strategic alliance with the Greek manufacturer Gizelis S.A.
Carlson carries the full Boschert lineup through Boschert USA, the exclusive North America representative for Boschert GmbH, Stierli-Bieger, PBT, Boschert Gizelis, and AMB Picot, providing profile benders, plate rolls, horizontal ram benders, punching and cutting machines, copper bar processing, press brakes, and guillotine shears.
Get a Quote
Tell us what you need and we will match you to the right Boschert machine with pricing and lead time.
Thanks. Your quote request is in.
A Carlson specialist will follow up shortly. Need to talk now? Call us at 781-937-9599.
That did not go through.
Something blocked the submission. Try again, or reach us directly at781-937-9599.
